Waypoint Counter Surveillance
TSCM / Counterintelligence Equipment Sales
Spider 300 Wire Line Analyzer
The Spider 300 line and mains analyzer is designed to detect and locate eavesdropping devices, galvanically connected to power and low-current wire lines. The analyzer uses both passive and active modes of operation. This allows detecting eavesdropping devices which are in active or in stand-by mode at the time of sweep operations.
There are set of functions implemented with the Spider 300, which are necessary for the detection and localization of wired eavesdropping devices. These functions include:
• Detection and evaluation of low-frequency signals in low-current conductive lines;
• Activation of electret cable microphones by filing an in-line bias voltage;
• Detection of eavesdropping devices signals, which are transmitting information via power and low-current lines in the frequency range from 100 kHz to 150 MHz;
• Detection and assessment of unauthorized galvanic connections to conductive lines using methods of non-linear junction detection and reflectometry;
• Tracking wire lines laid in walls and other building structures using a trace locator.
The use of the automated mode in combination with the electronic switch, allows the operator to carry out various kinds of measurements on all the possible combinations of pairs of multi-wire cable in seconds. Adapters, couplers and cables, which are included in the SPIDER 300 delivery set, allows connectng the device to the most common types of wired lines. The device can be used in a standalone mode or controlled from a personal computer.

Modes of operation
Providing different ways to detect wired eavesdropping devices is ensured by the multifunctionality of the Spider 300, appropriate accessory pack and the use of passive and active modes of operation.The systems technical and programming base, implemented in the structure and unique algorithms, provides the following modes:
• Electronic switch;
• Low frequency amplifier;
• Wireline receiver;
• nonlinear junction detector for wire lines;
• Reflectometer;
• Trace locator.




Low frequency Amplifier
Frequency diapason, Hz20....25 000
Input impedance, Ohm200
Amplification regulation diapason, dB0....60
Maximum signal amplitude on the entrance, V+/-13,8
Spectral density of voltage noise nV,Hz 3
Bias voltage diapason, V+/-26
Signal presentation formoscillograph, spectrogram
Wireline receiver
 Frequency range, kHz 100....150 000
 Time to scan the entire range, S 2
 The minimum detectable signal level, dBm -50....-75
 Dynamic range, dB 55
 Input impedance, Ohm 50
 Demodulation AM, FM
 The filter bandwidth, kHz 80
 The maximum allowable voltage In250(AC), 80(DС)
 The presentation of informationspectrogram, oscillograph, table
Non linear junction detector
Signal Amplitude, V0....13
Signal frequency, Hz45....55
Split indication of even and odd harmonicaspresent
Minimally detected level of non linear distortions, dB-60
Diapason of distance, m0...100
Measurement error percentage, %+/-1
Possibility of operation in lines with voltageno
Digital Voltmeter
Measurement range DC, V+/-80
The measurement range AC, V13
Frequency range, Hz0....30 000
Trace locator
Carrier frequency of the test signal, kHz100
Frequency of modulation of the signal, kHz1...2
Signal amplitude, V13
IndicationLight, sound
Possibility of the contact connection to the lineYes
Power Supply
Built-in Li-pol accumulator with voltage, V3,7
Consumed power, V1,2....2,5
Time of continuous operation at maximum consumed power, hour>7
Charging time of fully charged accumulator, hour7
Dimensions of the main unit (length, width, height), mm175х83х36
Weight of the main unit, kg0,375
Package dimensions (length, width, height), mm390х310х170
Weight of the set in the package, kg4,4

* Contact Us for pricing information
* Quantity discount pricing available
* 1 year warranty

"Specialized Countermeasures and Intelligence Solutions"

© 2019 - Waypoint Counter Surveillance Inc.