Waypoint Counter Surveillance
TSCM / Counterintelligence Equipment Sales
RadioInspector’s software packages and options
 
 
RadioInspector RC:
 
Performs the basic functions of radio monitoring and measurement of VHF-UHF-SHF radio frequency signals for "civilian" radio monitoring tasks which require metrologically correct measurement results.

• Frequency range (F1-F2) analysis

• Fixed discrete frequency (F1, F2, F3....Fn) analysis

• Detections of signals that exceed an operator-set signal strength amplitude threshold, establishing a list of detected signals; performing predefined analysis operations for signals that exceed the threshold

• Storing and loading tasks and frequency range scans (panoramas scans)

• Launching tasks in manual or automatic mode

 
RInspectorRC works with measuring instruments that are connected to a computer via the I_MasterDevice program
(I_MasterDevice can run on the same computer where RInspectorRC is running). The program is capable of defining a
'measuring path' including measuring instrument, antennas and transmission lines, their calibration (loss/gain) data. The
measuring circuit determines the measurement accuracy.

 


RadioInspector RC options:

 
DTest option (Digital Test)
Digital signal processing and analysis of signal standards: DECT, TETRA, GSM, Bluetooth, APCO25, Bluetooth, DMR
(MotoTRBO), 802.15.4 (ZigBee), analogue TV, vector analysis for "Kassandra", "Kassandra-M", "Kassandra-CO", Rohde&Schwarz FSV, FSW, FSQ, FSU, ESU, FSL and ETL series, PR100 and EM100.
*R&S FSV, FSW, FSQ, FSU, FSL and ETL series do not support voice demodulation for APCO25 and DMR or analogue TV
signal demodulation due to limited instrumental I and Q  bandwidth.

**R&S PR100, EM100 Does not support analogue TV signal demodulation due to limited instrumental I and Q bandwidth (it only classifies and identifies analogue TV signals) and does not support DECT and Bluetooth demodulation.

Note: Demodulator capabilities depend on the instrument's streaming I and Q bandwidth.

 
RС-AN option (AN - Analyzer)

Allows direct control of instruments from software (signal spectrum window control panels).

 
RС-Meas option (Meas - Measurement)
Measurement of signal parameters - frequency, frequency bandwidth, field strength, etc. This option is available only with RC-AN
option.
 
RС-Gео option      

Geoinformation system (MapInfo Professional) support. MapInfo software must be purchased separately. Please visit MapInfo manufacturer site for more information.

 
RC-Lan option

Remote control of devices via network.

 
RC-SoundScaner option

Operating an additional communication scan receiver for demodulating audio without stopping the main instrument's scanning function.

 
RC-Scanner option

Using scanning receivers for scanning of electromagnetic fields (instead of spectrum analyzers).

 
RC-DB option
A database for measuring instrument's results, an operator's database, also used for mission scheduling and radio monitoring automatic task launching.
 
Enables RadioInspector to require challenge-response authorization on start up or for a program session.
 
Note: The authorized frequencies database is supported in the main program and does not depend on the availability of this
option.
_______________________________________________________________________________________________________
_______________________________________________________________________________________________________ 
 
RadioInspector RT
 
Performs the same functions as RInspectorRC, but is designed and enhanced to search for clandestine and illicit transmitters – hidden radio eavesdropping devices. RInspectorRT does not require I_MasterDevice.
 
The program supports a number of features which are not available in RInspectorRC, in particular controlling Electronic Countermeasures (ECM) transmitters (for signal jamming) and the other functions.

 

RadioInspector RT options:

 
DTest option (Digital Test)
Digital signal processing and analysis of DECT, TETRA, GSM, Bluetooth, APCO25, Bluetooth, DMR (MotoTRBO), 802.15.4 (ZigBee), analogue TV, and vector analysis.
For "Kassandra", "Kassandra-M", "Kassandra-CO", Rohde&Schwarz FSV, FSW, FSQ, FSU, ESU, FSL and ETL series, PR100
and EM100.
*R&S FSV, FSW, FSQ, FSU, FSL and ETL series do not support voice demodulation for APCO25 and DMR or analogue TV
signals.
**R&S PR100, EM100 Do not support analogue TV signal demodulation (only classifies and identifies analogue TV signals) or
DECT and Bluetooth demodulation.

Note: Demodulator capabilities depend on the instrument's streaming I and Q bandwidth.

 
RT-Gео option      

Geoinformation system (MapInfo Professional) support. MapInfo software must be purchased separately. Please visit MapInfo manufacturer site for more information.

 
RT-Lan option

Remote control of devices via network. Requires I_MasterDevice.

 
RT-SoundScaner option
Operating an additional communication receiver for hand off of signals for audio demodulation without stopping the main
instrument's scanning functions.
_______________________________________________________________________________________________________
_______________________________________________________________________________________________________ 
 
RadioInspector RT-Light
 

The program is similar to RInspectorRT but is for use with simple communication scan receivers only. Long-term operational inspection of frequency ranges and fixed frequencies lists, collection, storage and displaying data about the radio frequency spectrum status for continuous time measurements (spectrogram or 'waterfall' with unlimited data size).

 * (Not supplied without options, at least one option required)

 

RadioInspector RT-Light options:

 
Light-SList

Using an authorized frequencies database, signal amplitude threshold line and threshold line signals exceedance list.

 
Light-Sound
Recording and analysis of demodulated audio signals, ability to automatically record demodulated audio when RF signals exceed
established amplitude thresholds.
 
Light-SoundScaner

Controlling an additional scanning receiver for demodulating audio without stopping the main receiver's scanning functions.

 
Light-Lan

Ability to control the scanning receiver via a network; transferring demodulated audio signals via the network in real time.

* In order to control  the receiver by the  RadioInspectorRT-Light program (with Light-Lan option) which is connected to a remote computer and to receive demodulated audio over the LAN in real time, the MasterDevice-Light program with the Light-Lan option must be running on the remote computer.


MasterDevice-Light
The program allows controlling scanning receivers on a remote computer.

The program runs in a background mode without showing active windows.

 
* In order to control  the receiver by the  RadioInspectorRT-Light program (with Light-Lan option) which is connected to a remote computer and receives demodulated audio signals from the receiver over the LAN in real time, the MasterDevice-Light program
with the Light-Lan option must be running on the remote computer.
_______________________________________________________________________________________________________
_______________________________________________________________________________________________________ 
 
RadioInspector RP
 
For processing of stored measurements results of radio frequency signal spectrum analysis (created by RInspectorRC or RInspectorRT programs). Provides results in amplitude-frequency-time-geographic coordinate scales, analyzes electromagnetic fields at the point of measurement or along a mobile geographic trace, presentation of analysis in 2- or 3-dimentional view,
displaying results on a digital map, calculation of radio coverage areas by field strength measurements, frequency channels' measurement; channel occupancy and estimation of spectrum usage, post-search measurement of signal parameters, searching
for interference sources, displaying signal amplitude direction finding results on a map with triangulation.
 
Delayed analysis of electromagnetic fields on controlled signals.
 
RadioInspector RP options:
 
RP-Geo option

Geoinformation system (MapInfo Professional) support. MapInfo software must be purchased separately. Please visit the MapInfo manufacturer site for more information.

 
RP-DB option

A database for measuring an instrument's results, an operator's database, also used for mission scheduling and radio monitoring automatic task launching.

 
An ability to enforce challenge-response authorization on start up or during a session.
 
Note: The authorized frequencies database is supported in the main program and does not depend on the availability of this
option.
_______________________________________________________________________________________________________
_______________________________________________________________________________________________________ 
 
I MasterDevice
 
Control of measuring instruments, multiplexing access from different operating programs, GPS receiver control, determination of antenna factors and transmission lines for calculations; transferring demodulated audio in real time from a remote computer.

Measuring instruments are connected to the computer I_MasterDevice executes. I_MasterDevice requires RInspectorRC or RInspectorRT for remote control via the LAN and Internet.

 
I_MasterDevice options:
 
MD-Gео option
Geoinformation system (MapInfo Professional) support. MapInfo software must be purchased separately. Please visit the MapInfo
manufacturer site for more information.
 
MD2 option

The program is designed for working with two types of measuring instruments, with models selected by the Customer.

 
MD3 option

The program is designed for working with three types of measuring instruments, with models selected by the Customer.

_______________________________________________________________________________________________________
_______________________________________________________________________________________________________ 
 

Wi-Fi Inspector:  Device and Network Hardware/Software Analysis System

 
Advanced stand-alone hardware/software system that includes RadioInspector Wi-Fi analysis software with a compact receiver module. Performs analysis of Wi-Fi networks, detection of operating access points and other devices on Wi-Fi networks, detection of links (data transmission) between devices on Wi-Fi networks and traffic calculation, displaying information about detected devices on Wi-Fi networks and other devices connected to them in text format, displaying detected devices and links between devices in graphic format, availability of various filters for displaying devices with required parameters, authorized "legal" devices list and Archive Operation: displaying recorded device activity; displaying device operation for a selected time interval. Multiple receiver modules can be used as distributed system for autonomous 24 X 7 data collection or remote monitoring applications.
_______________________________________________________________________________________________________
_______________________________________________________________________________________________________
 
I Remote Check
 
The I_Remote Check program provides the ability to efficiently and effectively remotely monitor single or multiple RF spectrum sensor data collection points at a facility or surveillance location simultaneously 24 X 7, logging all signal events that break an operator determined threshold. The program connects to all receivers or collection points for monitoring over a LAN with RadioInspector.
 
I_Remote Check is a separate program providing operators with the ability upload a facility floor plan or area map on the visual interface and place the location of each receiver-sensor collection point directly onto the floor plan or map. The visual interface includes conditional icons displaying the status of each remote monitoring collection point, indicating whether the receiver is operational, idle (not scanning) or when a detection event has occurred
_______________________________________________________________________________________________________
_______________________________________________________________________________________________________
 
IQ Process
 
A program for processing IQ data recorded and saved with RadioInspector RT or RC software. Designed to analyze the availability of information in IQ data and the estimation of the content and parameters of digital signal packets. Performs a digital frequency shift (fine tuning the frequency measurement to the signal frequency), digital filtering and resampling of the source data at a desired frequency rate, decimates original IQ data to a predetermined sampling frequency and allows operators to select ‘Windowing’ options to provide a powerful system to perform comprehensive professional post analysis of analogue and digital signals.
_______________________________________________________________________________________________________
_______________________________________________________________________________________________________ 
 
ISBD Signal List Viewer
 
A program for autonomous analysis of detected signals that exceed a threshold (which is generated by RInspector RC/RT
programs). Analyzes each 'threshold crossing event'.
_______________________________________________________________________________________________________
 

"Specialized Intelligence and Privacy Protection"

© 2017 - Waypoint Counter Surveillance Inc.